Thursday, 16 December 2010

Reflection


Simon Slides (21-Reflection)
So how did it go? How did we evaluate ourselves?

To start with we did what we purposed to do with out actually making the installation i feel the group got the idea of what we wanted to do and put it acrossed fairly well. Our aim was to make an interactive dancefloor for the Nightclub Oceana in Plymouth, one that engages the users to dance and as a result will changing the lighting of the room and tempo/beat of the music. Unfortunately we couldn't go out for real and do this so we will never know how it would of planned out in real time but i feel the group performed well and we keep our time management of the project in order. Each person was doing there part and showing results. All the tasks where spilt between us and as a group we converged them into our final installation and I would hope to say if we had done it for real it would of been a successful project. Its the first I've had to construct a project like this but I did enjoy it and has shown me how involving digital art can be.

Next time I would say we would need to use the wiki page more on the portal, it would of saved us a lot of time between communicating with each other to find out what each person had done, where as if we used the wiki page more we could have a constant feed of whats been done and what needs doing in the project. I'm also happy with how the group got along together, no conflicts and we were all pretty enthusiastic about our idea with no disagreement so we got lucky there. 


What did I like about our project?

Liked:
  • I enjoyed being able to design an idea with technologies i personally like. I like my music and doing a night club set up seemed ideal for me personally
  • How the group respond to the project and that we all got along with the same enthusiasm about designing this installation
  • Going out to nightclubs for an education... can't complain
  • The club we choose i feel was the best for our project
Disliked:

  • Not being able to actually manufacture the final project, but it was a valuable skill learned in the process to get to the finalization of the product
  • More time to really get more involved in this project as other projects have gotten in the way

Space and Set up
Oceana

I think our space was ideal for what we wanted to create. A busy nightclub that is still big enough that its not congested. Had the perfect set up for our equipment to be kept out of the way of people, Places to put our laptops were great as they where up high in a booth away from drunk people and wandering hands. Great sound system and lighting system to implement into our installation.

If anything id say the dance floor might be too busy for this installation, I feel it would overload the equipment with the sheer amount of people moving on the floor. But I am unable to find out as I can't actually manufacture the final installation and test it.

What did I learn?

 Now this project is over I can look about and say I've learned alot about using technology to be more creative and what we can do with it to affect a space and bend it to how we want the space to look. There's a line between technical and being creative but from this project I've learnt to be technical to be creative. This project personal was a whole new thing for me because I come from a fine art background at college in which I was creative using a paint brush, a pencil or other forms of media whereas this project and showed me you can be just as creative while being technical. So overall I found this project very interesting and its has got me keen to get out there a hopefully do a real life one and actually get to test the final result! 

So to reflect what i have learned, we had to produce something technical to operate what we wanted but it had to be creative enough to engage the audience to interact with it.

Reflection

Looking back at these requirements:

Agreed Requirements:

  • Must be interactive with people on the dancefloor using an appropriate form of interactive device
  • Make use of activities already in the club, i.e being on a dance floor so must engage people using the dancefloor
  • Installation has to be functional, able to handle the amount prolonged useage, heat and be waterproof so not be damaged or cause fire
  • Make full use of the dancefloor space, need multiple devices to interactive with the dancers
  • Installation needs to be out of reach of people whom maybe be drunk to avoid harm to them and others and also to the equipment
  • Needs to be compatible the systems already in the club such as the ambient lighting and sound system.
  • Little use of cables as possible to avoid trips and electrical hazards
  • A way to attach the interactive devices above dance floor
  • Must be secure so nothing can be damaged or stolen.
     
     I think we would of been able to carry these requirements. The installation is placed so it can't not be engaging so hopefully it would of been fully function and working well. The only thing I would be concerned about is the amount of usage it can take from the amount of people on the dance floor so we would have to really test it before we implemented it into the club dancefloor. 

    So to summarise it was a strong project with alot of creative thought backing it. We were asked to design a installation that was engaging to audience and i think we fitted that requirement pretty well. it offered plenty of technical skills and creative skills in the development of the it. So overall a very good choice for a project I think.


     

Deployment

Plan For Deployment:

Make sure we have a van road worthy and ready to go when needed. Make sure all equipment is function and ready to work prior to arriving. All coding and setup needs to be completed weeks  before the deployment is in stage as we will need time to check if our equipment is compatible with Oceana's if not we will need to time to invest in our own.

Projectors - http://www.projectorsite.co.uk/ "If we need to buy our own, a reliable site with a full range of projectors for us to buy depending on our requirements. Average projector is £200.

Cameras -http://www.cctvdirect.co.uk/categories/CCTV-Recorders/?gclid=CIiay9_U86UCFQJO4Qodvz-sow
"CCTV cameras would be ideal as there built for recording areas and are reliable. We would need this to be compatible with our software allowing us to get a direct feed of movement to our programme that will make the installation active.

Motion tracking cameras - http://www.imagotrackers.com/?gclid=COnwhbzV86UCFQse4QodXlXzoQ
Motion tracking software - http://trivisio.com/index.php/products/motiontracking/colibri

Failing motion tracking we could use heat sensors instead as a back up to detect the amount of people on the dancefloor. The advantage of this also would be there would be no interference from the lighting distorting the image that would be on a camera motion tracking systems but the down side to using heat doctors would be the heat given of from other equipment. So both have there pros and cons.

Heat dector - http://www.thermitrack.com/   "Thermal Tracking Camera"



Timetable

6:00 Allow time for us to set up before club opens at 9
6:10 find a space to park and find someone and get inside
6.20 After meeting staff and making friends with the bouncers, start looking at the area we are going to set up in
6.30 Realise we need a ladder to get to rigging equipment so make sure we take one in the van prior to arriving
6.40 start mounting equipment on the rigging and setting up the laptops and software in the second DJ booth
8.00 Everything set up and cables are all firmly secured along with the rest of the equipment

8.10 check software is all working and everything is connecting and communicating to each other leaving 50mins to sort out any software problems and technical issues if needed. Also test the installation works so we have a quick dance...
9.00 Doors open and people moving in towards the bars and we sit ready and waiting
12.00 People getting quite drunk so keep an eye on our equipment very closely
3.00 Oceana closes and we start the tear down
4.00 Everything taken down and packed up into the van
4.10 Set off home in van
4.20 Arrive home and unpack equipment and park van safely
4.45 Go bed!




Requirements

Mounting/protection of equipment

  • Attach to ceiling rigging of the dancefloor in Ice Lounge
  • firmly secure in place so cameras dont fall out and hit people on the dancefloor causing injury
  • Use the second free DJ booth to keep personal equipment safe and outer of the way of people, maybe use laptop chains to secure down further
  • Rest of equipment there so should already be secure as will make use of there sound system and lighting
·  
Cable protection
  • Stick cables down using rubber strips or the use of cloth tape or duct tape, one preferably that will be non slippy incase we have to mount it acrossed part of the floor
  • Cable ties to keep cables together so they don't messed up and pulled out


Contingency plan in case of faults/problem/emergencies

  • Spare cables incase any do not work or break or even if there not long enough, so need to make sure we know how much length we need
  • Duct tape for any quick repairs needed
  • Extra equipment incase a laptop doesn't work or there equipment is not compatiable so we will need to take a few projectors of our own
  • Fire extinguisher (CO2) and fire retardent spray incase equipment over heats and causes a fire hazard
  • back of software on storage devices in cause of software failure
  • Know where emergency exits are
  • Make sure theres no obstructions to the setting up of the installation

Transportation

  • A van will be needed to carry us and the equipment to the site ready for set up, failing that make sure we have a back of getting to the club, either taxi company numbers or a hire van
  • If own van in use make sure its working and has petrol

Get insurance incase something does go wrong!

Spec Design & Realisation



Requirements and things to consider?

To enable our installation to be successful within its space it will have to meet these requirements which will have to be agreed on upon by the client, the evaluation will reflect if we were successful or not.

Agreed Requirements:

  • Must be interactive with people on the dancefloor using an appropriate form of interactive device
  • Make use of activities already in the club, i.e being on a dance floor so must engage people using the dancefloor
  • Installation has to be functional, able to handle the amount prolonged useage, heat and be waterproof so not be damaged or cause fire
  • Make full use of the dancefloor space, need multiple devices to interactive with the dancers
  • Installation needs to be out of reach of people whom maybe be drunk to avoid harm to them and others and also to the equipment
  • Needs to be compatible the systems already in the club such as the ambient lighting and sound system.
  • Little use of cables as possible to avoid trips and electrical hazards
  • A way to attach the interactive devices above dance floor
  • Must be secure so nothing can be damaged or stolen.

    The specifications and requirements above need to be met in order for the installation to be safe and successful.

    The overview will give a clear idea of how to overcome these problems.


 Overview

To produce our final idea where leaned away from the Korg pad idea and favoured more the motion tracking as it would be a much cheaper and cost effective solution where as an interactive dance floor would only become damaged on a dance floor as lively as Oceana's. So we purposed to build a system that would use cameras mounted up the rigging of Oceana's light system and track the movement of people on the dancefloor. We would have a system set up to when the camera detect movement it would affect the lighting of the room, volume and tempo of the music. So essentially  making the dance floor interactive remotely via the cameras.



Specs of technology to achieve our installation
-Motion tracking cameras
-plugins to the sound, lighting system "ambient lighting and speakers"
-people to activate the floor


Mock up of music changing the colour theme of the room depending on the movement of the dancer.













A Storyboard mock up of how the Installation will work, I've used a cold to hot theme on the lights to illustrate how the lighting will be affected by the amount of people picked up on the dance floor. Images of the Ice Lounge.

Start of the night, the cameras picking up abit of movement from a few dancers, colour of the room remains a calm blue with slow tempo music in the background.

Floor starting to warm up abit now with more people coming to it, cameras picking up more movement changing the colour of lights to a more intense colour and causing the music to pick up tempo and beat.

Dance floor packed, cameras detecting alot of movement so therefor music is becoming louder and more fast paced and the colour of the room has turned really intense to illustrate this.

Contexual Study

We monitor the flow of people through the club through out the night. I made some density maps to illustrate this. This seemed the best way to get a idea of busy the place gets as trying to get a number count would be impossible as people are drunk and tend to wander all over the place and please every night is different depending on what venue is on. So a density map seemed the best solution for seeing how packed it gets at what hours. I set time intervals of 9"arrival/club opening" 11"time people tend to get to clubs in Plymouth" 1"mid point of the night" 2"everything in full swing" 3"kicking out time".




 Start of the night, people making there way pretty sober and settling in to the bar and seating areas waiting for people and buying drinks having social chats or a smoke or to.



















Alot of people starting to get drunker, occupying the dances floors slowly, yet alot of activity is still towards the smoking area and bars still.


















By one most people are now reaching the stage of being drunk and have mingled enough to move towards the dance floors, music is in full swing and everyone moving about the place

















 Dance floors are really starting to become busier as people are really out having a good time , bars abit more quite as the night reaches its peak. Ice Lounge is the busiest room so far while rest quieten down.





Three and kicking out time for the club, most people now very drunk and there's alot of mess - plastic cups, spilt drinks and ice over the dance floors and bars. Area is more busy towards cloak room area with the hot dog stand and outside where taxis are waiting to take people home.




Following this study it has confirmed that the area we selected for our installation is definitely the most popular and Messy! So our equipment is going have to be protected and waterproofed and kept out drunk peoples way to avoid damage!

Interaction:


Main interaction of people in the club is dancing, other activities include drinking, mingling, smoking.

Idea of Space:


Large dance floor "Ice Lounge" set up to be able to cope with high sound, 2 DJ booths, 2 Bars in the Ice Lounge, Circular dance floor with plenty of rigging to mount equipment yet they have a good set up already with plenty of projectors, lighting and speakers.

Limitations and Restrictions
Rigging is quite high up so equipment is going to have to able to handle the extra range of people on the dance floor. Circular shaped room so Installation will have to be formated to suit the layout. Alot of preinstalled equipment "has to be compatible with our own". Alot of heat generated from people as well as the equipment so our equipments is going to have to be handle the extra heat.



Environmental Study

Our trip to Oceana...

It was show time, we made a few trips to Oceana during our project because we wanted to get a real feel for it and visualise how our installation could work in this space. We did try C103 and Student Union to so get second ideas of how our project could be integrated into those clubs as well to makes sure we were definitely picking the right space. Map below illustrates locations of these clubs.


On arriving to Oceana we had to get a cab costing £5.40 we made our way into the club







We entered where illustrated by the arrow on the south east side of the building where our taxi dropped us off. First of we entered the ticket booths after being ID by the bouncers around "9:00pm". Tickets costing £5. Following up to the next area we went through the cloakroom and hot dog stand towards the first bar, An old styled log cabin theme with a large seating area. This area is just above the 2nd arrow. Toilets and where to our left and the smoking area and another bar just beyond that

Sat at the wooden bar, looking towards the toilets, left is the other bar and smoking area and right is towards the Disco room and Ice lounge





 This is where we made our first stop and got a drink to see what kinda people came into Oceana as it offered a great place to watch people walking in and out of the building and offered views in every direction of the club. Also and nice place to have a sit down and a drink!






 This is what happens when we did buy drinks!

Drink Before
Drink After















This illustrates that our installation is going to have to be water proof as the drunken behaviour shows that drinks will be split! and cause alot of mess! Not something we really want destroying our Installation.

The main focus area of Oceana for us was the Ice Lounge
"two shots - Empty and Busy" Busy shot at 1:00am

How it looks empty
Towards 1:00am Full of people and very lively

Heres a video i took illustrating how lively it is. If we were goin follow up the idea that movement of people would effect the dance then this seemed the perfect places, it had projectors, Lighting, alot of speakers and ofcourse a very large dance floor and plenty of places for us to mount equipment. Also we did notice 2 DJ booths so we could easily put our equipment out of the way of drunks and people so it doesn't get damaged.

 


Happy with what we had seen, we could start using the area to design our installation.



The Location





After looking round through the clubs we felt that Oceana seem to be the best to suit our needs, other clubs such as C103 and the Student Union would also be suitable but Oceana had the best space and was least congested outer the 3. Other clubs in Plymouth seem to small for us to implement our idea into. Here's a map of where Oceana is located in Plymouth. <<<
_________________________________________________


 ______________________________________________________

Another reason Oceana seemed the best choice for location was the amount of nights and events it offers, its a bustling club with a lot of space for us to set up where as other night clubs as i mentioned where very congested, here's a few flyer's of there advertisement - one particular reason Oceana seemed the best choice is due to the fact they play alot of dance music which will suit our technology very well considering we are basing it on movement and amount of people dancing on the dance floor to activate it.




 Here is a view of the actual club from the outside, Its situated next to a fairly large car park with easy access via taxis. The image gives you an idea of how big the club is, its one of the largest in Plymouth and one of the most popular due to all the nights they throw. If you walk through the University of Plymouth campus there will always be someone giving you a flyer for there next night out at Oceana.


After making it inside, i made a sketched up map of the area  to give an idea of what the layout of club was and allowing us to make our mind up where would the best location inside would be for us to set up.

 As you can see correspondent to the image of the front of Oceana you enter in through the bottom door at the south east corner where there is a ticket booth and entry to the cloakroom, the arrow on the map mark this route.

from here following arrows onto the second facing west there is a bar on right and the smoking area to your left with a bar directly in front of you as well as the first set of toilets. From the second arrow if you head north you will find the 2 major dance floors, the south side is more of a seating area. So ideally our installation is going to want to be located on one of the 2 dance floors, both are adequate enough for our installation, both have a good size and set up with plenty of space of people to wander around without it being congested. But after experiencing Oceana the Ice lounge in the top north east corner of the map seem to fit the bill the best. It was big, it played alot of mainstream dance music perfect for our idea to operate where as the other dance floor plays more classic cheesy tunes which I personally think will not be attractive enough to drunks wanting to really party hard, so all in all the Ice lounge seemed the most popular choose by us and also the people there, I will demonstrate this further in my contextual study. Here is pictures of the 2 dance floors illustrating the difference between them.


 Ice Lounge

Disco Room

The Technology

After the period of research we carried out on what we would like to base our installation on we decided as a group to come up with an interactive dance floor. That would involve people on how they occupied the space. So now we knew what to narrow our ideas down to from our list of research.
So to list the plan we needed :-

-A dance floor big enough and not too congested
-A method of interaction
-The process from the start moment of when its interacted to the final result
-A result...what would our interactive dance floor do?

Looking around the web, there is a big variety of interactive dance floors to be found, most of the tend to be light operated as the videos below demonstrate using LED lights and touch pad/ weight sensors to activate them. We wanted to develop this further as an idea and make these kinda dance floors effect more than just lighting up when stood on but how about if they effect the music, the lighting of the room or even the tempo of the dance floor.




Touch pad dance floor, tracks the movement of where you place your feet



 Lightspace dance floor, similar to the touch pad one but is more complex as it will track the users movements on the floor rather than just activating when pressed with your foot.


Example of a lightspace floor, inspiration of how a crowd of dance can effect how the floor operates and displays movement of people through the colour of the individual tiles. With this in mind we could follow something up similar which would track the movement or capacity of people on the floor and use it to effect more than just colours displayed through the tiles but even the music playing itself or the ambient light of the room



 A more complex version of the lightspace picture above. It shows a blue floor being distorted by the motion of two people walking across it causing the area around their feet to illuminate in red. I like this one compared to the tiled dance floors because its more smoother and nicer to see than the tiled counterpart above. Also being a higher resolution dance floor it will allow us to do more with it than just track the movement of dancers on coloured tiles, offering a more sensitive interface.

Wednesday, 15 December 2010

The Research


Here is a few ideas from the group:


Clubs - (In generalisation) People drink, dance, smoke (outside of course, because of the law), socialise, flirt, listen to music, throw up, and then drink some more! 

Clubs to look at - Cuba, Firefly, C103, Revs, Ride2, Jesters, Roundabout, Voodoo lounge, Varsity, Crash Manor

Technologies to consider - RFID wrist bands, motion detector to monitor if people are moving to a certain beat, if not the music changes to get people dancing more.



A few technology we choose to look at!


1)    Korg KAOSS PAD touch-screen synthesizer/sequencer in a club so essentially people can make their own music.
"

http://www.korg.co.uk/products/dance_dj/kp3/dj_kp3.asp
​

"A good technology to look at because it uses interactive technology that displays to demonstrate how touching a button can be used to create music with preloaded sound loops"






2)    Ambient light system, picks up where people are stood on e.g. a dance floor 










3)    Music using rhythmic beats to interact with a lot of motion "motion visulation" 

http://www.computer.org/portal/web/csdl/doi/10.1109/ICAT.2007.53 - a study on motion visualization

Examples - Lights "detecting the movement of a person causing the light to turn on when the     person walks towards its sensor range"
- Secruity Alarms " Causing them to sound if movement or heat is distored in the sensor vision"
  
We could use this device to activate our technology. 

 others to consider would be thermal tracking
and cctv cameras






4)    Tenori-on 

 http://tenori-on.yamaha-europe.com/uk/

"Tenori-on is a new and exciting electronic musical instrument for digital music construction and performance complete with built-in sound module. You play the Tenori-on simply by running your fingers over the 256 LED grid and many Tenori-on's can be networked together." ​
very simalar to the Korg Pad but can be linked up with multiple devices.






CCTV Cameras

"CCTV stands for closed circuit TV. Uses one or more video cameras to transmit video images and sometimes audio images to a monitor, set of monitors or a video recorder. It’s a closed network and is not openly transmitted to the public. Uses of CCTV is security monitoring, spying or for safety monitoring purposes."




Thermal Tracking 
"A thermographic camera or infrared camera is a device that forms an image using infrared radiation, similar to a common camera that forms an image using visible light. Instead of the 450–750 nanometer range of the visible light camera, infrared cameras operate in wavelengths as long as 14,000 nm"




Motion Tracking
"Motion capture, motion tracking, or mocap are terms used to describe the process of recording movement and translating that movement on to a digital model" In our case rather than a digital model we could upload it to a programme that could affect other things such as light levels or music tempo by the movement of person. Xbox Kinect is a prime example.






We were asked to place our finding on a wiki page in the portal and also upload any ideas we had, this is what our group came up with: 
LINK TO WIKI PAGE - 
https://tulip.plymouth.ac.uk/Module/IDAT101/Wiki/FunkyTown.aspx