Thursday, 16 December 2010

Deployment

Plan For Deployment:

Make sure we have a van road worthy and ready to go when needed. Make sure all equipment is function and ready to work prior to arriving. All coding and setup needs to be completed weeks  before the deployment is in stage as we will need time to check if our equipment is compatible with Oceana's if not we will need to time to invest in our own.

Projectors - http://www.projectorsite.co.uk/ "If we need to buy our own, a reliable site with a full range of projectors for us to buy depending on our requirements. Average projector is £200.

Cameras -http://www.cctvdirect.co.uk/categories/CCTV-Recorders/?gclid=CIiay9_U86UCFQJO4Qodvz-sow
"CCTV cameras would be ideal as there built for recording areas and are reliable. We would need this to be compatible with our software allowing us to get a direct feed of movement to our programme that will make the installation active.

Motion tracking cameras - http://www.imagotrackers.com/?gclid=COnwhbzV86UCFQse4QodXlXzoQ
Motion tracking software - http://trivisio.com/index.php/products/motiontracking/colibri

Failing motion tracking we could use heat sensors instead as a back up to detect the amount of people on the dancefloor. The advantage of this also would be there would be no interference from the lighting distorting the image that would be on a camera motion tracking systems but the down side to using heat doctors would be the heat given of from other equipment. So both have there pros and cons.

Heat dector - http://www.thermitrack.com/   "Thermal Tracking Camera"



Timetable

6:00 Allow time for us to set up before club opens at 9
6:10 find a space to park and find someone and get inside
6.20 After meeting staff and making friends with the bouncers, start looking at the area we are going to set up in
6.30 Realise we need a ladder to get to rigging equipment so make sure we take one in the van prior to arriving
6.40 start mounting equipment on the rigging and setting up the laptops and software in the second DJ booth
8.00 Everything set up and cables are all firmly secured along with the rest of the equipment

8.10 check software is all working and everything is connecting and communicating to each other leaving 50mins to sort out any software problems and technical issues if needed. Also test the installation works so we have a quick dance...
9.00 Doors open and people moving in towards the bars and we sit ready and waiting
12.00 People getting quite drunk so keep an eye on our equipment very closely
3.00 Oceana closes and we start the tear down
4.00 Everything taken down and packed up into the van
4.10 Set off home in van
4.20 Arrive home and unpack equipment and park van safely
4.45 Go bed!




No comments:

Post a Comment